C Type Hydraulic Power Press

Specification

Tonnage 10 Ton 20 Ton 30 Ton 50 Ton 80 Ton 100 Ton 150 Ton 200 Ton
Stroke Adjustment 10-100 10-100 10-100 10-125 10-150 10-175 10-200 10-200
Hole in Ram 25.4 32 38 50 51 51 62 62
Hole in Bed 82 95 100 152 175 200 200 200
Bed Size 400x250 500x300 560x380 406x660 800x560 850x600 912x632 1000x700
Distance bed to Ram 250 350 360 400 450 475 475 500
Strokes Per Minute 72 50 40 33 30 30 30 30
Motor H.P. 2 2 3 5 7.5 10 15 20
Floor to Bed 700 750 785 825 920 910 910 910
Length 660 900 970 1250 1270 1400 1500 2190
Width 710 915 900 1120 1524 1650 1850 2050
Height 1830 2080 2190 2460 3000 3700 3500 3250
Weight Kgs.
(Approx)		 450 800 1100 1950 3000 4000 5000 6800

1. for c type hydraulic power press machine.

2. we use standard part in machine which mention below in table.

Sr. No. Part Name Make
Power Pack
1 Pressure Gauge Micro/Pointer
2 Valves & Pumps Yuken / Rexroth / Veljan / Polihydrone
3 Filter Hydro line / Fullder
4 Oil Pipe (Flexible) Supersite / Gats
5 Motor Siemens / ABB / Crompton / Havells
6 PCM Polihydrone
Electric Control Panel
1 Push Button & Lamps ITC
2 Limit Switch Technique
3 Foot Switch Brisk
4 Power Contactors & Control Contractors Switch Gear, Overload Relays, MCB Relays Schneider
Cylinder
1 Seal Hallite (UK) / Parker / Tecklon (Italy)
2 Rod Hard Chrome Platted (100 micron)
3 Hydraulic Cylinder Harihar
4 Oil Tank & Maniford Block Harihar
5 Hydraulic Fitting Harihar
6 Oil Level Indicators, Air Breather & Suction Strainer Hydro Line
7 Hydraulic Hoses Super Seal / Parker

standard accessories :

  1. Variable Stroke Adjustment with Limit Switch / Movable Foot Switch / Stroke Counter
  2. Main Drive Motor / Power pack with all hydraulic Component

machine operating system :

  1. Electrical Control Panel / Auto Mode / Inching Mode / Manual Mode

Optional accessories :

  1. Photo safety Guard / Die Clamping / Die Cushion / OLC System with HMI

Note : electrical Equipment's are not Under Warranty