- NC Backguage
- Rear Sheet Supports
- Automatic contorl shearing
- Sheet rear stacking system
Hydraulic Shearing Machine
Specification
| MODEL | CUTTING LENGHT (M.M.) |
NORMAL RAKE ANGLE (M.S.) |
MAXIMUM RANKE ANGLE (M.S.) |
NOMINAL RAKE ANGLE (S.S.) |
MAXIMUM RAKE ANGLE (S.S.) |
VARIABLE RAKE ANGLE |
STROKEESH/ MINUTE ATMIN.&M MAX. RAKE ANGLE |
HOLDDOWINS | POWER H.P. | PACKING DIMENSION M.M. (L x W x H) |
|---|---|---|---|---|---|---|---|---|---|---|
| HHSM -315 |
1500 | 3 | 4 | 1 | 2 | 0.5-3° | 26/13 | 9 | 5 | 2250 X 1850 X 1950 |
| HHSM -320 |
2000 | 3 | 4 | 1 | 2 | 0.5-3° | 24/12 | 11 | 5 | 2750 X 1850 X 1950 |
| HHSM -325 |
2500 | 3 | 4 | 1 | 2 | 0.5-3° | 22/11 | 13 | 5 | 3200 X 1850 X 1950 |
| HHSM -330 |
3000 | 3 | 4 | 1 | 2 | 0.5-3° | 20/10 | 17 | 7.5 | 3700 X 1850 X 1950 |
| HHSM -415 |
1500 | 4 | 6 | 2 | 3 | 0.5-3° | 30/15 | 9 | 5 | 2250 X 1850 X 2050 |
| HHSM -420 |
2000 | 4 | 6 | 2 | 3 | 0.5-3° | 27/12 | 11 | 5 | 2750 X 1850 X 2050 |
| HHSM -425 |
2500 | 4 | 6 | 2 | 3 | 0.5-3° | 26/10 | 13 | 7.5 | 3300 X 2250 X 2400 |
| HHSM -430 |
3000 | 4 | 6 | 2 | 3 | 0.5-3° | 25/10 | 17 | 10 | 3700 X 2250 X 2400 |
| HHSM -440 |
4000 | 4 | 6 | 2 | 3 | 0.5-3° | 15/6 | 21 | 7.5 | 4700 X 2250 X 2400 |
| HHSM -450 |
5000 | 4 | 6 | 2 | 3 | 0.5-3° | 10/4 | 25 | 10 | 5700 X 1900 X 2100 |
| HHSM -460 |
6000 | 4 | 6 | 2 | 3 | 0.5-3° | 8/2 | 30 | 12.5 | 6700 X 1400 X 2100 |
| HHSM -460 |
6000 | 4 | 6 | 2 | 3 | 0.5-3° | 8/2 | 30 | 12.5 | 6700 X 1400 X 2100 |
| HHSM -615 |
1500 | 6 | 8 | 3 | 4 | 0.5-3° | 20/10 | 9 | 7.5 | 2250 X 1900 X 2100 |
| HHSM -620 |
2000 | 6 | 8 | 3 | 4 | 0.5-3° | 20/10 | 11 | 7.5 | 1750 X 1900 X 2100 |
| HHSM -625 |
2500 | 6 | 8 | 3 | 4 | 0.5-3° | 20/11 | 13 | 10 | 3300 X 2250 X 2500 |
| HHSM -630 |
3000 | 6 | 8 | 3 | 4 | 0.5-3° | 20/9 | 17 | 15 | 3800 X 2250 X 2500 |
| HHSM -640 |
4000 | 6 | 8 | 3 | 4 | 0.5-3° | 18/6 | 21 | 15 | 4800 X 2500 X 2500 |
| HHSM -650 |
5000 | 6 | 8 | 3 | 4 | 0.5-3° | 16/7 | 25 | 20 | 5800 X 2500 X 2700 |
| HHSM -660 |
6000 | 6 | 8 | 3 | 4 | 0.5-3° | 8/2 | 30 | 25 | 6800 X 2700 X 2700 |
| HHSM -815 |
1500 | 8 | 10 | 4 | 6 | 0.5-3° | 21/10 | 9 | 10 | 2250 X 2050 X 2200 |
| HHSM -820 |
2000 | 8 | 10 | 4 | 6 | 0.5-3° | 17/8 | 11 | 10 | 2750 X 2050 X 2200 |
| HHSM -825 |
2500 | 8 | 10 | 4 | 6 | 0.5-3° | 19/8 | 13 | 12.5 | 3300 X 2350 X 2600 |
| HHSM -830 |
3000 | 8 | 10 | 4 | 6 | 0.5-3° | 17/7 | 17 | 15 | 3800 X 2350 X 2600 |
| HHSM -840 |
4000 | 8 | 10 | 4 | 6 | 0.5-3° | 15/6 | 21 | 20 | 4800 X 2350 X 2600 |
| HHSM -850 |
5000 | 8 | 10 | 4 | 6 | 0.5-3° | 14/5 | 25 | 25 | 5800 X 2500 X 2800 |
| HHSM -860 |
6000 | 8 | 10 | 4 | 6 | 1-3° | 12/5 | 30 | 30 | 6800 X 2700 X 3000 |
| HHSM -1015 |
1500 | 10 | 13 | 6 | 8 | 1-3° | 19/10 | 9 | 12.5 | 2250 X 2050 X 2300 |
| HHSM -1020 |
2000 | 10 | 13 | 6 | 8 | 1-3° | 18/8 | 11 | 12.5 | 2750 X 2050 X 2300 |
| HHSM -1025 |
2500 | 10 | 13 | 6 | 8 | 1-3° | 16/7 | 13 | 20 | 3300 X 2500 X 2800 |
| HHSM -1030 |
3000 | 10 | 13 | 6 | 8 | 1-3° | 15/7 | 17 | 20 | 3800 X 2500 X 2800 |
| HHSM -1040 |
4000 | 10 | 13 | 6 | 8 | 1-3° | 13/5 | 21 | 25 | 4800 X 2600 X 3000 |
| HHSM -1050 |
5000 | 10 | 13 | 6 | 8 | 1-3° | 12/5 | 25 | 25 | 5800 X 2800 X 3000 |
| HHSM -1060 |
6000 | 10 | 13 | 6 | 8 | 1-3° | 10/4 | 30 | 30 | 6800 X 3000 X 3200 |
| HHSM -1315 |
1500 | 13 | 16 | 8 | 10 | 1-4° | 15/7 | 9 | 15 | 2300 X 2200 X 2500 |
| HHSM -1320 |
2000 | 13 | 16 | 8 | 10 | 1-4° | 10/4 | 11 | 15 | 2800 X 2200 X 2500 |
| HHSM -1325 |
2500 | 13 | 16 | 8 | 10 | 1-4° | 10/4 | 13 | 25 | 3350 X 2600 X 2800 |
| HHSM -1330 |
3000 | 13 | 16 | 8 | 10 | 1-4° | 8/4 | 17 | 25 | 3850 X 2600 X 2800 |
| HHSM -1340 |
4000 | 13 | 16 | 8 | 10 | 1-4° | 8/4 | 21 | 25 | 4850 X 2600 X 2800 |
| HHSM -1350 |
5000 | 13 | 16 | 8 | 10 | 1-4° | 6/2 | 25 | 30 | 5850 X 2800 X 3000 |
| HHSM -1360 |
6000 | 13 | 16 | 8 | 10 | 1-4° | 4/1 | 30 | 35 | 6850 X 3000 X 3200 |
| HHSM -1615 |
1500 | 16 | 20 | 10 | 13 | 1-4° | 10/4 | 9 | 25 | 2350 X 2200 X 2600 |
| HHSM -1620 |
2000 | 16 | 20 | 10 | 13 | 1-4° | 10/4 | 11 | 30 | 2850 X 2200 X 2600 |
| HHSM -1620 |
2000 | 16 | 20 | 10 | 13 | 1-4° | 10/4 | 11 | 30 | 2850 X 2200 X 2600 |
| HHSM -1625 |
2500 | 16 | 20 | 10 | 13 | 1-4° | 9/3 | 13 | 30 | 3350 X 2600 X 2900 |
| HHSM -1630 |
3000 | 16 | 20 | 10 | 13 | 1-4° | 12/2 | 17 | 30 | 3900 X 2600 X 2900 |
| HHSM -1640 |
4000 | 16 | 20 | 10 | 13 | 1-4° | 12/2 | 21 | 30 | 4900 X 2800 X 3000 |
| HHSM -1650 |
5000 | 16 | 20 | 10 | 13 | 1-4° | 10/1 | 25 | 35 | 5900 X 3000 X 3200 |
| HHSM -1660 |
6000 | 16 | 20 | 10 | 13 | 1-4° | 9/1 | 30 | 40 | 6900 X 3200 X 3400 |
| HHSM -2015 |
1500 | 20 | 25 | 13 | 16 | 1-4° | 9/4 | 9 | 30 | 2350 X 2500 X 2600 |
| HHSM -2020 |
2000 | 20 | 25 | 13 | 16 | 1-4° | 9/4 | 11 | 40 | 2900 X 2500 X 2600 |
| HHSM -2025 |
2500 | 20 | 25 | 13 | 16 | 1-4° | 8/3 | 13 | 40 | 3500 X 2750 X 3000 |
| HHSM -2030 |
3000 | 20 | 25 | 13 | 16 | 1-4° | 7/3 | 17 | 40 | 4000 X 2750 X 3000 |
| HHSM -2040 |
4000 | 20 | 25 | 13 | 16 | 1-4° | 7/2 | 21 | 50 | 5000 X 2950 X 3200 |
| HHSM -2050 |
5000 | 20 | 25 | 13 | 16 | 1-4° | 6/2 | 25 | 60 | 6000 X 3100 X 3400 |
| HHSM -2060 |
6000 | 20 | 25 | 13 | 16 | 1-4° | 6/1 | 30 | 40 | 7000 X 3300 X 3600 |
| HHSM -2515 |
1500 | 25 | 30 | 16 | 20 | 1-4° | 7/4 | 9 | 50 | 2400 X 2800 X 2800 |
| HHSM -2520 |
2000 | 25 | 30 | 16 | 20 | 1-4° | 8/4 | 11 | 50 | 3100 X 2800 X 2800 |
| HHSM -2525 |
2500 | 25 | 30 | 16 | 20 | 1-4° | 7/3 | 13 | 60 | 3600 X 2900 X 3000 |
| HHSM -2530 |
3000 | 25 | 30 | 16 | 20 | 1-4° | 7/2 | 17 | 60 | 4100 X 3000 X 3200 |
| HHSM -2540 |
4000 | 25 | 30 | 16 | 20 | 1-4° | 6/2 | 21 | 75 | 5100 X 3100 X 3200 |
| HHSM -2550 |
5000 | 25 | 30 | 16 | 20 | 1-4° | 7/1 | 25 | 75 | 6100 X 3200 X 3500 |
| HHSM -2560 |
6000 | 25 | 30 | 16 | 20 | 1-4° | 6/1 | 30 | 75 | 7100 X 3400 X 3700 |
Choice of CNC Controllers for controlling functions like NC backguage, blade gap, rake angle, stroke Also integrates the machine with automated accessories for sheet feeding, gauging, conveying seperating, stracking etc.
